4 Great Articles On Your Home Plumbing

A sump pump is not only fun to say, but it’s also a pretty important part of your plumbing to pay attention to. If you’re about to get some heavy spring rain, it’s especially necessary to make sure it’s working so it can remove all the rainwater that could potentially build up. Check that you know where your sump pump is first – you’ll often find it in your basement. Inspect everything to be sure it’s all in the right place, and remove any debris from the outdoor drain. You should also have a look at the electrical components to see if there are any problems that might need to be repaired. If you have an in-ground irrigation system, taking a look at all the components for it is a smart thing to do. In particular, there is a backflow device which ensures that potable water isn’t contaminated, and this part needs to be working. Look carefully for anything that could be damaged or anything that isn’t working properly. If you notice any problems, make sure you get them fixed before you start watering your garden. Get it all working, and you can safely take care of your lawn or other garden elements during the spring and summer.


A piping arrangement in which a drain from a fixture, appliance or device discharges indirectly into another fixture, receptacle or interceptor at a point below the flood level rim and above the trap seal. Air Chambers: Pressure absorbing devices that eliminate water hammer. They should be installed as close as possible to the valves or faucet and at the end of long runs of pipe. Air Gap: (Drainage System). The unobstructed vertical distance through the free atmosphere between the outlet of the waste pipe and the flood level rim of the receptacle into which the waste pipe is discharging. Air Gap: (Water Distribution System). The unobstructed vertical distance through the free atmosphere between the lowest opening from any pipe or faucet supplying water to a tank, plumbing fixture or other device and the flood level rim of the receptacle. Air Lock: A bubble of air which restricts the flow of water in a pipe. Anode Rod: A sacrificial rod installed in a water heater, composed of one or more metals that protects the tank from corrosion, helping to extend the life of the tank.


Some may be similar while others are completely different. The website Teach House, who is certified by Cambridge University has a blog about the different Chinese customs and etiquette. Gold, who wrote the blog, talks about all the different areas of their culture. The most interesting point he makes is when he is talking about their bathroom etiquette. Their public toilets are very different from Western toilet. In China, they are called squatters. As you can see in the picture, it is simply a porcelain hole in the ground. It is like a toilet bowl built into the floor instead of above it. Fun fact: there is rarely toilet paper provided, so most Chinese people always carry tissue paper with them. So, if you ever visit you should too.


Its working mechanism is pretty much the same as that of a gas tankless water heater. One of the noticeable differences is that they Gordontheplumber.com Naperville Illinois 60566 use a heating element. This is as opposed to the heat exchanger present in a gas heater. Like in the gas heaters, when a faucet is on, and water flows through the heater. A flow sensor triggers activation of electric power, to heat up the heating element. Since the heating element is in contact with the flowing water, it transfers the heat to the water. This working mechanism has gained it the name “instantaneous heater.” Immediately the flow of water stops, the heater cuts the supply of power to the heating element. This leads to minimal wastage of water and power. The electric heater is set to work with a certain rate of water flow. If exceeded, it may not function at the same efficiency as before. You can customize the settings to maintain a constant temperature.


You may also be interested to read